vATIS is an intuitive and easy to use ATIS client for the VATSIM network. vATIS was created to simulate the Digital ATIS (D-ATIS) system used by the FAA with the intent to reduce controller workload. Never again will you be interrupted while recording an ATIS — vATIS will automatically update it for you.
Read the change log for a summary of bug fixes, changes or enhancements in each version release.
After you download the vATIS installer file, double-click the executable to launch the installer. You will be prompted to choose an installation location. It is recommended that you leave the default location selected as the local application data folder to avoid any file permission problems.
The Empty Config File option will reset your vATIS configuration file to the default settings. You will lose all configured settings.
When the installation is complete, you will have the option of launching vATIS.
Before using vATIS, you should familiarize yourself with a few basic terms and concepts.
A facility is the geographical location of the ATIS (e.g. KLAX).
Configuration Profiles are used to save ATIS free text and settings, allowing you to quickly populate vATIS. You can create an unlimited number of configuration profiles per facility. For example, you could create a profile for "West Ops", "East Ops", "Night Ops", etc.
To start vATIS, double-click the desktop icon (if you chose to create one during the installation process) or locate vATIS in your programs list.
Each time you launch vATIS, a window with a list of facilities (if you created or imported any) will show. See the Facilities section for details on how to create a facility.
Each time you launch vATIS, a facilities list will show (see screenshot below). The first time you run vATIS, the list will be empty. Most users will download and import a facility configuration file created by their ARTCC.Create a New Facility
To create a new facility, click the New button at the top right of the facility list. You will be prompted to enter a facility ICAO identifier (e.g. KLAX) and a name for the facility (e.g. Los Angeles). After you save the facility, it will be added to the facility list.Import a Facility Configuration File
To import a pre-configured facility configuration file, click the Import button. A file browser dialog will show allowing you to browse to the location of the facility file (.gz file). Importing a facility configuration file will also import all configuration profiles associated with each facility within the import file.Export a Facility
You can export a configured facility by highlighting the facility name in the list and clicking the Export button. This is useful if you want to make a backup copy of your facility configurations.
ARTCC Facility Engineers: To export a facility and its configuration profiles to share with your ARTCC, highlight the facility name in the facility list and click the Export button. Choose a location to save the exported file.Select a Facility
To select a facility, double-click the facility name in the list. The facility and its profile configurations will be loaded and the main vATIS window will become active.
The ATIS frequency is defined here. To change it, double click on the frequency.
The Information Status Bar across the top of the main vATIS window gives an at-a-glance look at the current ATIS situation. From left to right is the current zulu time, wind and altimeter reading.
The current ATIS code. Click to increment the ATIS code letter.
This area shows the current METAR report for the current facility. The METAR is only visible when you are connected to the network.
The Airport Conditions is a free form text field used to define the current airport conditions such as active runways, approaches in use, taxiway closures, etc. This text field follows the Text Parsing Rules. You can also define static airport condition messages that you can toggle on and off. See Pre-Defined ATIS Messages for more information.
Similar to the ARPT COND text field, the NOTAM MSG text field is a free form text field used to define NOTAMs in the ATIS. This text field follows the Text Parsing Rules. You can also define static airport condition messages that you can toggle on and off. See Pre-Defined ATIS Messages for more information.
The Function Control Bar at the bottom of the main vATIS window contain several functions.
The Configuration Profile dropdown list shows all configuration profiles that are created within the loaded facility. To select a configuration profile, click the dropdown list and choose a configuration profile by clicking its name. vATIS will populate with the configuration profile data. See the Configuration Profiles section to learn more about creating profiles.
In addition to inputting free-from text in the APRT COND and NOTAM MSG boxes, you can also define static messages that can be toggled on or off. This is useful for defining messages that you may frequently use but need the ability to quickly turn them on or off. These messages are independent of configuration profiles so no matter which configuration profile you have active, you will be able to access all your pre-defined messages.
To create a new pre-defined message, click on either the ARPT COND or NOTAM MSG labels. A popup dialog will show allowing you to toggle existing messages on or off, modify existing messages or add new ones.
To toggle an existing message, simple check or uncheck the checkbox next to the appropriate message. After you do this, the Apply button will become active. Please note that even though you may have messages toggled on, they will not be included in the ARPT COND or NOTAM MSG free form textboxes.
If you have a transmitting ATIS and you toggle a message on or off, you will be prompted with the option to stop transmitting the ATIS so it can be updated. If you choose yes, the ATIS will stop transmitting. You will then have to click the TX ATIS button to start transmitting the updated ATIS. If you chose no, the current ATIS will continue to transmit until you manually stop and restart the transmission.
To connect vATIS to the VATSIM network, click the Connect to VATSIM button at the lower right of the main vATIS screen. After you click the button, a connection dialog will appear (see screenshot below).
Enter your full name that is associated with your VATSIM account.
Select your VATSIM rating from the dropdown list.
Enter your VATSIM Certificate Identification Number (CID).
Enter your VATSIM network password.
Select a VATSIM server from the list. It is recommended you choose a server that is geographically closest to you.
After you click the Connect button, the Connect to VATSIM button on the main vATIS screen will turn green and read "Disconnect". See the Disconnecting from VATSIM section for more information on how to disconnect from the network.
To begin broadcasting an ATIS on the VATSIM network you must first select a configuration profile from the dropdown list at the bottom of the main vATIS screen. If you do not have any configuration profiles created, please read the Configuration Profiles section for information on how to create a configuration profile.
After you have configured the ATIS to your liking (i.e. airport conditions, notams, etc), choose an ATIS code – click the ATIS code box to increment the letter.
To begin transmitting the ATIS on the network, click the TX ATIS button. You can click this button any time to stop transmitting the ATIS.
When a new METAR report is received, vATIS will notify you of an ATIS update with an audible "ding" sound and the vATIS icon in the taskbar will begin to flash (if you have these notifications enabled). When you activate the vATIS window, a popup dialog will show with the new ATIS code with a button to acknowledge the update (see notification screenshot). You can disable the popup dialog in the facility configuration settings.
VATSIM controllers may subscribe to a vATIS connection to receive notification of a new ATIS.
To subscribe to ATIS updates, send a private chat message to the ATIS connection with the command SUBSCRIBE. vATIS will acknowledge your subscription request and add you to the subscribers list. You will receive a private message from the vATIS connection when a new ATIS is published.
You can unsubscribe from the ATIS notifications by sending a private chat message to the vATIS connection with the command UNSUBSCRIBE
The "track" command is used to subscribe to ATIS updates. Refer to the vSTARS or vERAM documentation for more information on how to use the track command.
EuroScope users will be notified of an ATIS update with an audible notification sound. The ATIS letter within EuroScope will automatically update.
The Facility Configuration window contains additional options for configuring the ATIS facility. To open the facility configuration window, use the key combination CTRL + F.
The ATIS Template tab has a text field with a template used to format the ATIS. Clicking the Default Template button will restore the ATIS template to the default template. The following variables can be used in the template, in any order.
|[FACILITY]||The ATIS facility name (i.e. the airport name)|
|[ATIS_CODE]||The current ATIS letter code|
|[FULL_WX_STRING]||Recommended Variable – Inserts the full weather string|
|[OBS_TIME]||The METAR observation time|
|[SURFACE_WIND]||The reported surface winds|
|[RVR]||The RVR (runway visibility range)|
|[PREVAILING_VISIBILITY]||The visibility, if reported in the current METAR report|
|[PRESENT_WEATHER]||The reported present weather conditions (e.g. rain, snow, hail, etc.)|
|[CLOUDS]||The reported cloud conditions|
|[TEMP]||The reported temperature|
|[DEW]||The reported dewpoint|
|[PRESSURE]||The reported pressure reading|
|[ARPT_COND]||Inserts the text in the ARPT COND free form text field|
|[NOTAMS]||Inserts the text in the NOTAM MSG free form text field|
Configuration Profiles are used to store ATIS options without having to redefine them each time you use vATIS.
To create a Configuration Profile, click the New Profile button at the bottom left of the facility configuration window. A popup dialog to specify a name for the profile will show. When you create a profile, it will automatically become active. You can delete or rename a configuration profile using the respective buttons at the bottom of the facility configuration window.
Any changes you make to vATIS when a configuration profile is selected will be saved to that configuration profile. For example, you could create a configuration profile for "east operations" and input the appropriate information. Then, each time you choose the "east operations" configuration profile, vATIS will automatically populate with the "east operations" data.
The second tab in the facility configuration window is where you can define contractions. If you specify a contraction that already exists in the Contraction List, then it will be overridden with the contraction you insert.
Contractions are useful for tricking the voice synthesizer to pronounce words or acronyms the way you want. For example, by default RNAV is synthesized as "area navigation", but you can make vATIS pronounce it as "are-nav".
The third tab in the facility configuration window contains miscellaneous configuration options. These options are global to the active facility and are shared with each configuration profile within the facility.
Specify the official METAR observation time. For example, if the METAR normal updates at 53 minutes past the hour, then type 53 in the box. If the number in the box does not match the METAR observation time minutes, then the word "special" will be appended after the observation time in the ATIS broadcast.
If this checkbox is checked, vATIS will attempt to read the METAR using international standards (i.e. non-US format).
vATIS now allows you to change the text to speech voice. Note: certain voice options only have one gender option.
The vATIS Settings dialog is where you specify your network credentials and to choose which server to connect to. Additionally, there are also options to disable ATIS notifications, the ability to keep the main vATIS window visible and to automatically check for updates when vATIS starts. To open the settings window, use the key combination CTRL + S.
To disconnect vATIS from the VATSIM network, click the blue Disconnect button at the bottom right of the vATIS main window. If an ATIS is currently transmitting, it will disconnect automatically.
Closing the entire vATIS application (without clicking the Disconnect button) will also disconnect you from the VATSIM network.
Each time you launch vATIS, it will check if there is a newer version available. If there is, you will be prompted to download the update.
If you choose to download the update, vATIS will download the updated installer. When the download is complete, vATIS will close and the installer will open to begin the installation of the new version.
You can use the following text parsing rules in the Arrival/Departure/Other free text field and the Notams free text fieldTaxiways
To parse taxiway names, you must append the acronym TWY or TWYS in front of the group. For example, TWY E16 would be read as "taxiway echo sixteen" by the voice synthesizer.Runways
To parse runway names, you must append the acronym RWY or RWYS in front of the group. For example, RWY 25R would be read as "runway two five right" by the voice synthesizer.Numbers
To correctly pronounce numbers, append an asterisk (*) followed by the number. For example, *5058 would be read as "five thousand, fifty-eight" by the voice synthesizer. If the number should be pronounced as a negative value, append a dash after the asterisk. For example, *-8 would be read as "minus eight".Frequencies
To correctly read frequencies, they must be typed in the full MHz format. Only frequencies 100.000 to 199.999 MHz will be parsed correctly. For example, 127.65 would be read as "one two seven point six five" by the voice synthesizer.Airport Names
To parse airport identifiers to the airport name, append a plus sign (+) to the ICAO identifier. For example, +KLAX would be read as "Los Angeles International Airport" by the voice synthesizer.Navaids
To parse navaid identifiers to their name, append a plus sign (+) to the navaid identifier. For example, +GBN would be read as "Gila Bend" by the voice synthesizer.
vATIS is preconfigured to translate and synthesize the following FAA contractions if used in the Arrival/Departure/Other free text field or the Notams free text field.
|ALS||APPROACH LIGHTING SYSTEM|
|BAA||BRAKING ACTION ADVISORIES|
|HAZ WX INFO||HAZARDOUS WEATHER INFORMATION|
|INVOF||IN VICINITY OF|
|LAHSO||LAND AND HOLD SHORT OPERATIONS|
|LLWS||LOW LEVEL WIND SHEAR|
|NOTAM||NOTICE TO AIRMEN|
|NOTAMS||NOTICES TO AIRMEN|
|OAT||OUTSIDE AIR TEMPERATURE|
|OTS||OUT OF SERVICE|
|PAPI||PRECISION APPROACH PATH INDICATOR|
|PIREP||PILOT WEATHER REPORT|
|PRM||PRECISION RUNWAY MONITOR|
|TFR||TEMPORARY FLIGHT RESTRICTION|
|TODA||TAKE OFF DISTANCE AVAILABLE|
|UFN||UNTIL FURTHER NOTICE|
|VASI||VISUAL APPROACH SLOPE INDICATOR|
If you're having trouble configuring or using vATIS, please post your message in the vATIS Support Forum.